8.85" (224mm) Shrink Wrap Tube

The price is per unit foot. Ideal PVC shrink wraps for building your own battery packsOperational Guide Use the following formula to select your PVC wrap:PVC Width > = ( the circumference of your pack ) / 2 + 5 mm Unit conversion1 mil = 0.001 inch Technical Specification Width8.85" (225mm) Thickness0.15mm Color:Black Shrink Ratio:Cross Sectional45% - 53%longitudinal12% - 18%
-54%

Tenergy Smart Universal Battery Pack Charger: 12V - 16.8V

Best Charger for charging all NiMH/NiCD battery pa... Morecks 12V,13.2V,14.4V,15.6V,16.8VTemperature sensor to offer 2nd level over charge protectionUniversal for for any NiMH /NiCd battery packs 12V - 16.8V (10-14 NiMH/NiCD Cells packs) Fast charger with current switch to select either, 0.9A and 1.8A. Deliver full charge within 1 - 2 hours. Charging Current 0.9A for battery packs with capacity from 1100mAh -2200mAh. For 2000mAhpack, charging time is 1 hour. Charging Current 1.8A for battery packs with capacity above 2000mAh. For 3000mAh pack, charging time is 1.5 hours. Smart Charger:with automatic voltage detection. Use pulse and negative pulse technology to avoid battery overheating during fast charging, optimized for battery pack's cycle life. Red LED will be on during charging. Automatically charging ending with negative delta V. Worldwide usage with 120-240V AC Safety protection fuse for over current, short circuit & reverse polarity protection. Accessories Included 1 standard Tamiya Female connector and Fuse house with the smart battery charger. 1 connector adaptor from standard Male Tamiya to Mini Female. 1 set of clip adaptor with Male Tamiya connector on one end. 2 additional fuses Smart Charger Specification FOR 12V-16.8V NI-MH/NI-CD Battery Packs (10-14 Cells in series ) InputAC100-240V Output12V-16.8V 0.9 or 1.8A Dimensions11.7 x 5.8 x 3.6 cmOperation InstructionConnect battery pack to output connector and plug AC power source. Make sure battery polarity is connected correctly (Red wire is positive) Charger will detect battery voltage automatically, Red LED will be on during charging When battery is fully charged, current will reduce to trickle charging at 50mA,Green LED will be on Battery will be charged at 0.9A or 1.8A constant current, Approx, Charging time is about 2 hrs for 3000mAh battery,1.5hr for 1800mAh battery. Don't charger battery pack with voltage less than 12V or Voltage bigger than 16.8V and capacity less than 1100mAh. Please contact your seller for instruction. Mfg is not responsible for any damage and consequent damage by Misusage. CautionThe charger is designed for indoor use only. The Charger should be positioned horizontally and work in well ventilated condition, avoid water and keep it away from flammable explosive goods. Don't cover the charger when charging, ambient temperature shall not be more than 40oC Don't touch the plug. Cut off the power supply before connect or disconnect the charger with batteries. Don't try to disassemble the charger, High voltage inside, danger! Less
Expired
49.9922.99 USD
Get it
-35%

Tenergy 22.2V 2500mAh 25C 6 Cell LIPO Battery Pack w/ 7 Pins Balancing Connector

Rated Maximum Continuous Discharge25C (62.5 Amps)R... Moreated Maximum Burst Discharge50C (125 Amps) for 5 SecsRecommended Charging Current1C (2.5 Amps or less)Dimension135 x 43 x 31.5 mmWeight13.9oz / 395gDischarge Wire12Awg silicon wire, no connector.Balancing taps20Awg super flexible silicon wire, 7 pins JST type 6S balancing tap NotePlease read instructions before using! Less
Expired
199.99129.95 USD
Get it
-66%

Standard Female Tamiya Connector

Female Standard Tamiya connector for battery packs... More for RC applications. 150mm long 14 AWG or 16 AWG silicon wire Less
Expired
4.991.69 USD
Get it

Tenergy Propel 7.2V 4200mAh Flat NiMH Battery Packs w/ Tamiya

For Serious Competition Purpose Specifications:Ten... Moreergy Sub C 4200mAh Propel Model--Beat or match IB PacksMinimum Capacity4000mAhNumber of Cells6xSub C / 7.2V 4200mAhContinuous Discharge Rate10C ( 42Amps)Bust Rate20C (84Amps)Suggested Charge Rate6 AmpsActual Resistance1.5-1.7 mili-Ohm/cell Dimension136mm x 47mm x 24mm Weight420gTypical Application Data:Discharge Rate30 Amps Runtime:535+ Sec Cut-off Voltage.90Average Voltage at 330Sec 1.22+This pack works excellent in the following RC vehicles:Traxxas Stampede Associated RC10 B4 Losi XXX BK2 Yokomo MR-4TC Duratrax Evader BXTraxxas Rustler Associated RC10 T4 Losi XXX-4 GT Yokomo D1 Duratrax Evader TX Traxxas 4-Tec Associated TC4 Losi XXX-T MF2 Yokomo FC3SHPI Pro 4 Traxxas Bandit Associated RC10 L40 Losi JRXS Yokomo FD3S HPI Sprin Traxxas Spirit Associated RC10 L30 Losi XXX-S Yokomo FR34 XRAY T1FK05 Traxxas Street Sport Associated RC12 L30Yokomo AE86 Tamiya TLT-1 Traxxas SRT Yokomo S15Yokomo YRX-12 MORE... Less
Expired
31.89 USD
Get it

Protection Circuit Module (PCB) for 11.1V Li-Ion Battery Pack 3A Working 15A Cut-off

Protection Circuit Board for 11.1V Li-ion and Li-p... Moreolymer battery pack.Designed for 11.1V Li-ion or Li-Polymer battery.Prevents 11.1V Li-ion or Li-polymer battery from over-charging / over-discharging.Continuous Discharge Current3A. Fully Compatible with both Li-Ion and Li-Polymer cells. RoHS Compatible. Connection Instruction:B+Connected to the third battery's positive terminal. B1-Connected to the second battery's positive terminal. B2-Connected to first the battery's positive terminal. B-Connected to the first battery's negative terminal.P+Connected to the battery's output or the charger's positive terminal. P-Connected to the battery's output or the charger's negative terminal.Technical Specifications:.style1 {border-collapsecollapse;border1px solid #000000;}.style2 {border1px solid #000000;}.style3 {text-aligncenter;border1px solid #000000;vertical-align:middle;}ItemContentCriteriaOver Charge ProtectionOver Charge Detection Voltage4.35??0.025VOver Charge Release Voltage4.15??0.05VOver Discharge ProtectionOver Discharge Detection Voltage2.4??0.08VOver Discharge Release Voltage3.0??0.15VRated Operational Current3AOver Current ProtectionOver Current Detection Current15??1ARelease ConditionCut LoadDetection Delay Time5~15msShort Circuit ProtectionShort ProtectionImplementedRelease ConditionCut Short CircuitInterior ResistanceMain Loop Conduction Resistance50-100mCurrent ConsumptionCurrent Consumed in normal Operation35A MaxDimension50 x 16 x 1.1 mmApplication Notes Do not subject the PCB to input voltage over 20V. Input voltage over 20V will damage the PCB.Please use the compatible charger for your battery pack; pay special attention to your input and output voltage current to avoid PCB damage.When mixing over-charged batteries and over-discharged batteries together, PCB will be in dual state of over-charging and over-discharging. In this situation, charging and dis-charging are both disabled.Internal static charge protection circuit built into the PCB. However, do not subject the PCB to high static charge to avoid damage.Without the written agreement from us, please do not use this PCB for application in medical instruments, emergence devices, auto, airspace vehicles, or other devices that might have impact on human body. WarningBecause of thevery high energy density, Li-ion battery pack must be connected to a protection circuit module to prevent accidental battery explosion caused by over-charging or over-discharging. Less
Expired
9.07 USD
Get it
-22%

Li-Polymer 3.7V 35Ah (95212223) Battery (DGR)

Untitled DocumentFeatures Tenergy Unique High-Cap... Moreacity Li-Po Single CellHigh operating voltageEnergy density is high,volumetric energy density of 350Wh/L and gravimetric energy density of 135Wh/kg.No memory effectSelf-discharge is less than 10% per monthCharge/discharge cycle characteristics are excellentSafety characteristics are excellentThe battery has a wide discharging temperature range of -20 °C to +60 °CThe capacity in amp-hours is guaranteed, and will be exceeded most of the time.No. Item Spec Note 1 Model 95212223/35000mAh 2 Charge Voltage 4.2V 3 End-of-charge voltage 4.2V CC\CV 4 Nominal Voltage 3.7V Cell Voltage between 3.6V ~3.9V beforeshipping 5 Nominal Capacity ≥[email protected] 0.2C Discharge Nominal Capacityrefertothecapacityof 0.2C discharge with2.75Vcut-off voltage,afterchargingwithstandardmethod.6Cycle Life≥ 300 Times One cycle refertoonechargeperiodand then one discharge period. Test condition Charge0.2C to 4.2V Discharge0.2C to 2.75V The cycle lifeisthecycletimeswhen the discharge capacityis about 80% ofthe rated capacity. 7 Self-discharge Residual Capacity>90% After standard charging, storied at 25°C±0.5°C for30 days, thenmeasure the capacityas item 4. 8 Impedance Typical:10mΩ Max15mΩ Afterstandardcharging, measure the internal resistance withAC1KHz 9 Max. Charge Current 1.0C 10 Max. DischargeCurrent 1.0C 11 Discharge Cut-offVoltage 2.75V12Operating Temperature Discharge:-10℃~+60℃Charge0 ℃~ +45℃ Cellsmustbestoried at3.6V-3.9V. During long periodstorage, cellsshould be maintained every 90 days.The method is todoacharge-dischargecycle with standard method, then charge to 3.7—3.9V. 13 Storage Temperature -20 ℃~+45℃ 14 Cell Weight Approx 1Kg 15 Cell Dimension Length:225mm Max Width:212mm Max Thickness:9.5mm Max Measured with weighting 300gf at 25℃± 0.5℃ Notincluding TabsCautions CAUTIONwhen working with Li-ion cells, they are very sensitive to charging characteristics and may explode if mishandled.User should have enough knowledge on Li-Ion rechargeable batteries in charging, discharging, and assembly before use.We are not responsible for any damage caused by misuse or mishandling of these Polymer Li-Ion batteries3.7V 35000mAh (95212223)Datasheet Less
Expired
219.99169.99 USD
Get it

Tenergy Rechargeable LiFePO4 12V 7Ah 89.6Wh Battery

.b1 {color#000;} Product Description Thisis a dro... Morep in replacement for Lead-acid battery. It require no change tolead acid battery charging system. It can be placed in scooters,wheelchairs, anything that uses a sealed lead acid battery.LIFEPO4 batterycontains no poisonous lead, no acid, and do not create gasses duringcharge, which regular Lead-Acid batteries do. Compared to lead-acid,LIFEPO4 batteries are super light, have much lower self-discharge, donot sulfate, and are environmentally friendly. Which made it the perfectreplacement solution for lead acid batteries.Longer battery life. Twice to four times the service life of lead-acid batteriesHigh safety features. No explosive gasses.Super Light weight. Only half the weight of same 12V 7Ah lead-acid batteriesHigh power, up to 30A discharge current.High-temperature working capability.Steady discharge and charge performance.Low self discharge with no memory effect.Green products - environmentally friendly, no lead and no acid.Short circuit protection.Over charge and over discharge protection.Includes 12V 7Ah battery pack. Specifications Voltage12V Capacity7AhWeight41ozDimension160x60x93mmMaximum Discharge Current30A Warning Risk of fire, explosion, or burning.Do not short circuit the (+) and (-) terminals with any metals.Do not immerse, wet, or throw battery in water.Do not keep battery in heated temperature above 60C or throw battery into fire.Do not disassemble, crush, or modify the battery.Stop using the battery if abnormal heat, odor, deformation or abnormal condition is detected. Less
Expired
129.95 USD
Get it
-56%

Tenergy T-1199B Universal NiMH/NiCd Battery Charger

Recharges 1 to 4 pieces of AAA, AA, C and D Ni-MH/... MoreNi-Cd batteriesStandard charge for 1 or 2pcs of 9V cellsWith battery type selector for Ni-Cd or Ni-MH AAA, AA, C and D batteriesRecharges batteries in single or groupAutomatic charging current selection for different sizes of batteriesBuilt-in IC timer controlLED lamp to indicate proper chargingFast charging in the specified period with automatic switch to trickle charge 120V AC 60Hz Charging TimeBatteriesCharging TimeNi-Cd D/C/AA/AAA4 hours by timer controlNi-MH D/C/AA/AAA8 hours by timer controlNi-Cd/NiMH 9V10-15 hours by manual Download product manual here. Less
Expired
29.9912.99 USD
Get it