High quality 11.1 V Li-Ion rechargeable battery packMade of9pcs 2200mAh cylindrical 18650 cells with PCB and poly switch for full protectionLight weight and higher energy density than other rechargeable batteryNo memory effect and rechargeableLonger storage life than NiMH batteryBuilt-in IC chip will prevent battery pack fromover charge and over discharge and prolongs battery lifeIdeal for replacing batteries for 12V HID (10 to 13W) and Diving Lights for long running timePerfect for for RC toy, lighting, robots,and DVD external battery. Recommend Smart Universal Li-ion Battery charger for proper chargingTechnical SpecificationsCapacity 6600mAh Voltage 10.8V (Peak at 12.6V, avg. at 11.1V) Dimensions 73mm height x 166.5mm width x 19mm thickness Weight 15 oz Max. charge current 1C Max. discharge current 2C Cut off voltage over-charge protection13V over-Discharge protection7.2V CautionsCAUTIONwhen working with Li-ion cells, they are very sensitive to charging characteristics and may explode if mis-handled.User should have enough knowledge on Li-Ion rechargeable batteries in charging, discharging and assembly before use.We are not responsible for any damage caused by misuse or mishandling of these Li-Ion batteriesStrongly suggestthat youuse our smart Li-Ion battery charger to recharge the battery packNever use conventional DC adapter to charge the battery module) We are NOT responsible for any damage that is caused by the misuse of the Li-Ion BatteryPlease don't make parallel connection with more thanthree modules to avoid uneven charge.Download product data sheet here.
Fully Charges 1 to 4 pcs AA/AAA cell in 30 minutes... MorePowered by a switching power AC adaptor with worldwide input from 100-240VAC 50/60Hz4 independent channels with individual LED display for quick charge/trickle charge/bad cell detectionAutomatic charging currect selection for AA & AAA batteriesIntelligent microprocessor controlledNegative delta V cut-off functionTemperature sensors to avoid the battery from being damage by over-heatingSafety timer controlledWith 12V car charging functionPacking Each in a clamshell packDownload product manual here. Less
Tenergy 250 mAh 1S LIPO battery is replacement bat... Moretery made for E-flite Blade Tandem. It will give more PUNCH and ROBUST performance due to its higher current output and power. Direct replacement, no modification is needed. Better and longerrun time than the stock battery. Capacity250mAh Voltage3.7V Discharge rate15C Dimensions35x21x7mmDirect replacement, no modification needed!*Eflite Blade Tandem Rescue RTF is registered trademarks of Horizon Hobby. Less
Product8.4V NiMH 4200mAh Crane Stock Battery PackM... MoreakeMade of 7 pcs matched high powerSub CNiMH 4200 mAhConnectorMini Tamiya Male connector assembled with 16 G wireFit ModelsAirsoft Marui 16 series, Airsoft Star Crane Stock Feature-Twice longerfiring time than original NiCd Battery - Rapidly charge up and long cycle lifeWeight1.15lbDimensions5.25" (Length); 2.95" (Width); 0.87" (Thickness)Recommended ChargerSmart Universal Battery Pack ChargerUse attentionSet charging current to 0.9A when chargingusing the above charger for the inital first several charging Less
Tenergy High Capacity 9.6V 3500mAh Nickel Metal Hy... Moredride RC Battery Pack.Made with 8xSc 3800mAh high capacity and high power NiMH Batteries.Advanced NiMH battery technology, no battery memory effect.Easy operation, battery can be charged anytime without the need to fully discharge.Builtwith 14 gauds silicone wire andstandard Tamiya Connector.Specially design for Airsoft guns for power intensity and long running time.High maximum 38 Amp discharge rate for fast vehicle start and maneuvers.Longer running time and easier operation than original NiCd battery pack.6 months warranty.SpecificationsVoltage9.6VMaixmum Discharge Rate38AConnector TypeStandard Tamiya.DimensionsHeight 0.9"; Width 1.7"; Length 7.0"Weight15.5 Oz.Best Charger for charging all RC Car, RC air and Airsoft battery packs 7.2V, 8.4V, 9.6V and 12V. Universal for for any NiMH /NiCd battery packs 7.2V - 12V (6-10 Cells pack) Fast charger with current switch to select either, 0.9A and 1.8A. Deliver full charge within 1 - 2 hours.Charging Current 0.9A for battery packs with capacity from 1100mAh -2200mAh. For 2000mAhpack, charging time is 1 hour.Charging Current 1.8A for battery packs with capacity above 2000mAh. For 3000mAh pack, charging time is 1.5 hours.Smart Charger:with automatic voltage detection.Use pulse and negative pulse technology to avoid battery overheating during fast charging, optimized for battery pack's cycle life. Red LED will be on during charging. Automatically charging ending with negative delta V. Worldwide usage with 120-240V AC Safety protection fuse for over current, short circuit & reverse polarity protection. Accessories Included1 standard Tamiya Female connector and Fuse house with the smart battery charger. 1 connector adaptor from standard Male Tamiya to Mini Female. 1 set of clip adaptor with Male Tamiya connector on one end. 2 additional fusesSmart Charger SpecificationFOR 6V-12V NI-MH/NI-CD BATTERY PACK 6-10PCS BATTERYInputAC100-240VOutput6-12V 0.9or1.8AOperation InstructionConnect battery pack to output connector and plug AC power source. Make sure battery polarity is connected correctly (Red wire is positive) Charger will detect battery voltage automatically, Red LED will be on during charging When battery is fully charged, current will reduce to trickle charging at 50mA,Green LED will be on Battery will be charged at 0.9A or 1.8A constant current, Approximate Charging time is about 1.5hrs for 3000mAh battery,1hr for 1800mAh battery. The charger is designed for faster charging NiCd and NiMH battery packs from 6 to 12V for RC car/Air and Air soft gun. Don't charger battery pack with voltage less than 6V or Voltage bigger than 12V and Capacity smaller than1100mAh. Battery pack must be made by high drain current cell. Please contact your seller for instruction. Mfg is not responsible for any damage and consequent damage by Misusage. The Third Party Customer Reviews (A new window will open) Less
DescriptionThe PolyTac is a super bright and compa... Morect personal light available with either the latest in power LED technology or Xenon bulb. The high-performance model of the PolyTac LED with a C4 LED and Streamlight engineered reflector for added brightness. The light uses CR123A Lithium primary cells.Features High impact super tough nylon polymer for exceptional durability and a sure gripAdjustable head allows for variable spot-to-flood focus (Xenon only) LED Solid State Power Regulation provides maximum light output throughout battery life (LED) IPX7 rated design; waterproof to 1 meter for 30 minutes All openings o-ring sealed for water resistance Powered by two 3-volt CR123A lithium batteries w/10-year storage life C4 LED technology, impervious to shock with a 50,000 hour lifetime Up to 15,000 candela (Peak Beam Intensity) and 150 lumens measured system output. Deep reflector provides far-reaching targeting beam with a tight spotlight and optimum peripheral illumination Runs 3 hours to the 10% output level Solid-State power regulation that provides maximum light output throughout battery life High impact super tough nylon polymer Unbreakable polycarbonate lens with scratch-resistant coating IPX7 rated design; waterproof to 1 meter for 30 minutes Tail cap push button provides one handed momentary or constant "on" operation Run Time All claims to 10% of initial lumen output.Includes PolyTac LED HP Flashlight 2 Streamlight 3 volt CR123A Lithium Batteries (with a shelf life of 10 years) Blister PackagingSpecifications:Head1.7" Body1.00" Length5.65" Weight4.4 oz. ColorBlackDimensionsLength5.65 in. (14.35 cm) Major Diameter1.70 in. (4.32 cm) Body Diameter1.00 in. (2.54 cm)Weight4.4 oz (125 grams)* Less
The breathtaking high quality print smartphone tou... Moregh cases provide real protection for your smartphone. Camber-absorbing rubber corners provide maximum protection, while the shock-absorbing layer between the case and the phone protects against bumps and scratches. Even with the Tough Cases on, you'll have full access to all the buttons and ports on your smartphone Less
2 cell Li-Polymer 900mAh battery pack.10C continuo... Moreus discharge rate of10 amps Maximum charge rate 12 Amps for burst.Dimensions71mm x 25mm x 12mm Weight1.5 oz / 43 gramsThis is the perfect battery for your lovely E-Flite Blade CX Helicopter. It will fit in the battery tray perfectly, more capacity more flying time, more fun! Recommended charger:Universal Li-ion / Li-polymer Smart Balanc Charger to charge this battery pack.Recommend to use Cell Shield (for 2-6 Series connected packs) or LiPo Shield (for 1-12 series connected packs) to prevent the packs from over discharge. A group of paralleled cells can be treated as one single cell. CautionImproper use like overcharging and over discharging can cause explosion and/or fire.User of the battery is required tohave sufficient Li-polymer charging experience and technical knowledge. Tenergy or All-Battery.com are not responsible for any damage or injury caused by misuse, misunderstanding or abuse of this product. The Third Party Customer Reviews (A new window will open) Less