Li-Polymer 3.7V 35Ah (95212223) Battery (DGR)

Untitled DocumentFeatures Tenergy Unique High-Capacity Li-Po Single CellHigh operating voltageEnergy density is high,volumetric energy density of 350Wh/L and gravimetric energy density of 135Wh/kg.No memory effectSelf-discharge is less than 10% per monthCharge/discharge cycle characteristics are excellentSafety characteristics are excellentThe battery has a wide discharging temperature range of -20 °C to +60 °CThe capacity in amp-hours is guaranteed, and will be exceeded most of the time.No. Item Spec Note 1 Model 95212223/35000mAh 2 Charge Voltage 4.2V 3 End-of-charge voltage 4.2V CC\CV 4 Nominal Voltage 3.7V Cell Voltage between 3.6V ~3.9V beforeshipping 5 Nominal Capacity ≥[email protected] 0.2C Discharge Nominal Capacityrefertothecapacityof 0.2C discharge with2.75Vcut-off voltage,afterchargingwithstandardmethod.6Cycle Life≥ 300 Times One cycle refertoonechargeperiodand then one discharge period. Test condition Charge0.2C to 4.2V Discharge0.2C to 2.75V The cycle lifeisthecycletimeswhen the discharge capacityis about 80% ofthe rated capacity. 7 Self-discharge Residual Capacity>90% After standard charging, storied at 25°C±0.5°C for30 days, thenmeasure the capacityas item 4. 8 Impedance Typical:10mΩ Max15mΩ Afterstandardcharging, measure the internal resistance withAC1KHz 9 Max. Charge Current 1.0C 10 Max. DischargeCurrent 1.0C 11 Discharge Cut-offVoltage 2.75V12Operating Temperature Discharge:-10℃~+60℃Charge0 ℃~ +45℃ Cellsmustbestoried at3.6V-3.9V. During long periodstorage, cellsshould be maintained every 90 days.The method is todoacharge-dischargecycle with standard method, then charge to 3.7—3.9V. 13 Storage Temperature -20 ℃~+45℃ 14 Cell Weight Approx 1Kg 15 Cell Dimension Length:225mm Max Width:212mm Max Thickness:9.5mm Max Measured with weighting 300gf at 25℃± 0.5℃ Notincluding TabsCautions CAUTIONwhen working with Li-ion cells, they are very sensitive to charging characteristics and may explode if mishandled.User should have enough knowledge on Li-Ion rechargeable batteries in charging, discharging, and assembly before use.We are not responsible for any damage caused by misuse or mishandling of these Polymer Li-Ion batteries3.7V 35000mAh (95212223)Datasheet

3.15" (80mm) Shrink Wrap Tube

The price is per unit foot.Ideal PVC shrink wraps ... Morefor building your own battery packsFits battery cells of A size and largerFits Sub-C (Sc) cells soldered end-to-end.Operational GuideUse the following formula to select your PVC wrap PVC Width > = ( the circumference of your pack ) / 2 + 5 mmUnit conversion1 mil = 0.001 inch Technical SpecificationWidth3.15 Inch Thickness5 mil Shrink RatioCross Sectional45% - 53% longitudinal12% - 18% Less
Expired
0.84 USD
Get it
-33%

NEW! Protection Circuit Module For 18.5V (12A) Li-ion Battery Pack(12A Limit)

Features * Applies to 5 cells Li-ion/Li-polymer ba... Morettery pack protection* Internally Trimmed Charge and Discharge Voltage Limits* Discharge Current Limit Detection* High Quality and High Yield100% Tested before Shipment Working Voltage:18V Maximal working current12ADimension110*40mm No. Items Min Typ Max Unit 1 Charging voltage 21.1 21.25 V 2 Charging current 10 A 3 Discharging current 12 A 4 Current consumption 150 uA 5 Balance current for single cell 55 60 65 mA 6 Blance voltage for single cell 4.18 4.2 4.22 V 7 Overcharge detection voltage for single cell 4.325 4.35 4.375 V 8 Overcharge detection delay time 0.5 1 1.5 s 9 Overdischarge detection voltage for single cell 2.2 2.3 2.4 V 10 Overdischarge detection delay time 0.5 1 1.5 s 11 Short circuit protection Exterior short circuit 12 Protection circuitry resistance 20 40 mΩ 13 Operating Temperature Range -40 85 C 14 Storage Temperature Range -40 125 C Less
Expired
45.3629.99 USD
Get it

Samsung Galaxy S8 Plus Smartphone Tough Case - Gabriel

The breathtaking high quality print smartphone tou... Moregh cases provide real protection for your smartphone. Camber-absorbing rubber corners provide maximum protection, while the shock-absorbing layer between the case and the phone protects against bumps and scratches. Even with the Tough Cases on, you'll have full access to all the buttons and ports on your smartphone Less
Expired
29.90 USD
Get it

Protection Circuit Module (PCB) for 7.2V Li-ion 18650 / 18500 Battery Packs 3.5A Working (5A cut-off) w/ Gas Gauge port

Protection Circuit Board for 7.4V Li-ion and Li-po... Morelymer battery packDesigned for 7.4V Li-ion or Li-Polymer 2 cells battery packIntegrate gas gauge portPrevents 7.4V Li-ion or Li-polymer battery from over-charging, over-discharging. Fully Compatible with both Li-ion and Li-Polymer cells Adopt RICOH 5460 protection IC Adopt A0 8822 MOSFET**NoteWhile this PCB has a gas gauge port, the gas gauge itself is not included.SpecificationsPCB Specifications(32056) ParameterMinimumTypicalMaximumUnitsOvercharge Detection VoltageThreshold*4.2254.2504.275VOvercharge Release VoltageThreshold*4.004.054.10VOvercharge DetectionDelay0.71.01.3sec.Over-Discharge Detection VoltageThreshold*2.32.42.5VOver-Discharge Release VoltageThreshold*2.93.03.1VOver-Discharge DetectionDelay89128167msec.Over-Current DetectionThreshold5.06.58.0AShort CircuitProtectionImplemented/ActivePCB Internal Resistance (fromP+ to P-)3040m?SupplyCurrent8??AOperating TemperatureRange-4085??CStorage TemperatureRange-40125??C *NoteIndividual cellvalues. PCBDimensions Length28.8mm0.5mmWidth14.8mm0.5mmThickness1.9mm (3.8mm at connector)0.5mm Connection Illustration CautionsBecause of thevery high energy density, Li-Ion Battery pack must be connected to a protection circuit module to prevent accidental battery explosion caused by over-charging or over-discharging. Less
Expired
3.79 USD
Get it

VXi VEHS-P1 Electronic Hook Switch

Electronic Hook Switch for most Polycom SoundPoint... More IP and all VVX Series desk phones. (Polycom SoundPoint IP300, 301, 500, 501, 600 and 601 do not support EHS capability) Less
Expired
Sold by Jabra
62.00 USD
Get it

Apple iPhone X Smartphone Tough Case - Tranquility

The breathtaking high quality print smartphone tou... Moregh cases provide real protection for your smartphone. Camber-absorbing rubber corners provide maximum protection, while the shock-absorbing layer between the case and the phone protects against bumps and scratches. Even with the Tough Cases on, you'll have full access to all the buttons and ports on your smartphone Less
Expired
29.90 USD
Get it

Tenergy Propel 7.2V 4200mAh Flat NiMH Battery Packs w/ Tamiya

For Serious Competition Purpose Specifications:Ten... Moreergy Sub C 4200mAh Propel Model--Beat or match IB PacksMinimum Capacity4000mAhNumber of Cells6xSub C / 7.2V 4200mAhContinuous Discharge Rate10C ( 42Amps)Bust Rate20C (84Amps)Suggested Charge Rate6 AmpsActual Resistance1.5-1.7 mili-Ohm/cell Dimension136mm x 47mm x 24mm Weight420gTypical Application Data:Discharge Rate30 Amps Runtime:535+ Sec Cut-off Voltage.90Average Voltage at 330Sec 1.22+This pack works excellent in the following RC vehicles:Traxxas Stampede Associated RC10 B4 Losi XXX BK2 Yokomo MR-4TC Duratrax Evader BXTraxxas Rustler Associated RC10 T4 Losi XXX-4 GT Yokomo D1 Duratrax Evader TX Traxxas 4-Tec Associated TC4 Losi XXX-T MF2 Yokomo FC3SHPI Pro 4 Traxxas Bandit Associated RC10 L40 Losi JRXS Yokomo FD3S HPI Sprin Traxxas Spirit Associated RC10 L30 Losi XXX-S Yokomo FR34 XRAY T1FK05 Traxxas Street Sport Associated RC12 L30Yokomo AE86 Tamiya TLT-1 Traxxas SRT Yokomo S15Yokomo YRX-12 MORE... Less
Expired
31.89 USD
Get it

Protection Circuit Module (PCB) for 11.1V Li-Ion Battery Pack 3A Working 15A Cut-off

Protection Circuit Board for 11.1V Li-ion and Li-p... Moreolymer battery pack.Designed for 11.1V Li-ion or Li-Polymer battery.Prevents 11.1V Li-ion or Li-polymer battery from over-charging / over-discharging.Continuous Discharge Current3A. Fully Compatible with both Li-Ion and Li-Polymer cells. RoHS Compatible. Connection Instruction:B+Connected to the third battery's positive terminal. B1-Connected to the second battery's positive terminal. B2-Connected to first the battery's positive terminal. B-Connected to the first battery's negative terminal.P+Connected to the battery's output or the charger's positive terminal. P-Connected to the battery's output or the charger's negative terminal.Technical Specifications:.style1 {border-collapsecollapse;border1px solid #000000;}.style2 {border1px solid #000000;}.style3 {text-aligncenter;border1px solid #000000;vertical-align:middle;}ItemContentCriteriaOver Charge ProtectionOver Charge Detection Voltage4.35??0.025VOver Charge Release Voltage4.15??0.05VOver Discharge ProtectionOver Discharge Detection Voltage2.4??0.08VOver Discharge Release Voltage3.0??0.15VRated Operational Current3AOver Current ProtectionOver Current Detection Current15??1ARelease ConditionCut LoadDetection Delay Time5~15msShort Circuit ProtectionShort ProtectionImplementedRelease ConditionCut Short CircuitInterior ResistanceMain Loop Conduction Resistance50-100mCurrent ConsumptionCurrent Consumed in normal Operation35A MaxDimension50 x 16 x 1.1 mmApplication Notes Do not subject the PCB to input voltage over 20V. Input voltage over 20V will damage the PCB.Please use the compatible charger for your battery pack; pay special attention to your input and output voltage current to avoid PCB damage.When mixing over-charged batteries and over-discharged batteries together, PCB will be in dual state of over-charging and over-discharging. In this situation, charging and dis-charging are both disabled.Internal static charge protection circuit built into the PCB. However, do not subject the PCB to high static charge to avoid damage.Without the written agreement from us, please do not use this PCB for application in medical instruments, emergence devices, auto, airspace vehicles, or other devices that might have impact on human body. WarningBecause of thevery high energy density, Li-ion battery pack must be connected to a protection circuit module to prevent accidental battery explosion caused by over-charging or over-discharging. Less
Expired
9.07 USD
Get it